2007 honda odyssey power steering hose how to#

This is how to install a new power steering pump: The power steering pump body can now be removed.You can do this using an impact wrench or a socket. Remove the mounting bolts which hold the power steering pump onto the engine block.Using a power steering removal tool, detach the power steering pump pulley by removing the locking nut.This includes each pressure line from the power steering reservoir as well as the return hose and hose clamp from the gearbox. Once the primary supply line is removed, you can remove all other lines from the power steering pump.Using a socket or ratchet, remove the hydraulic lines that are connected to the bottom of the power steering pump.Then, place a drip tray under your vehicle as there may be a power steering fluid leak (PS fluid leak).First, locate the lines going to your power steering pump.

Here’s how to disconnect the power steering pump itself: Finally, remove the radiator fan shroud and the fan to gain clear access to the power steering pump.Then, remove the lower engine covers (skid plate.).To remove the serpentine belt, loosen the tensioner pulley located on the left side (as you look at the engine.) Once loose, you can easily slip off the belt. Detach the serpentine belt or drive belt.Open the hood and remove your engine cover.Using a hydraulic lift or a jack, lift up your vehicle onto jack stands.

Before anything else, disconnect your battery (starting with the negative terminal.).You need to access your power steering pump first: With that said, here’s how to perform a power steering pump replacement: 1. However, if you’re not familiar with auto parts, it’s best to let a professional mechanic handle the repair job to avoid hurting yourself or doing any more damage to your car. A power steering pump replacement (PS pump replacement) can be done as a DIY job at home.